Dimension

366 mm (H) X 300 mm (W) X 306 mm (D)

Product weight

7.1KG

Purified Water Flow Rate

Up To 24Litres/Hour

7-Stage Purifying Technology

Advanced 7 Stage Purifying Technology

Membrane type

NSF Certified -Thin-film composite spiral wound

Pump type

Diaphragm pump, 24V dc

% Recovery

Up to 60%

TDS Reduction

90% (min.)

Power rating

42 Watts

Pressure rating

10-30 PSI

Rated voltage

100 - 240 V a.c., 50/60 Hz (Device can be withstand voltage fluctuation from 100 to 300 Va.c.)

Material of construction for plastic parts

Food Safe, Non-toxic Plastic

Length of power cord

1.5 meters

Total dissolved solids

Up to 2000 mg/lit

Total Hardness

500 mg/lit (max.)

Iron

0.3 mg/lit (max.)

Turbidity

1 NTU (max.)

1. 6.5 to 7 under running water conditions.
2. Permeate flow rate and recovery are based on standard test conditions and may vary depending on input water quality, TDS, pressure, and life of filter elements.
3. Input water quality and TDS content are important determinants of output water quality.
4. If input pressure exceeds 30 PSI, please install a company provided pressure reducing valve at an additional cost.
If the pressure is less than 10 PSI then you need to buy "Pressure enhancing pump" at an additional cost.
Device should not be installed in a house where input pressure is greater than 60 PSI.
Post-Carbon Filter fitted in the device may need to be changed intermittently at extra cost in case you face smell issues.
5. In case the iron is higher than this, it is recommended to install a company provided iron removal filter at extra cost.
# Technical specifications are subject to change or improvement without prior notice.